Toilet doors can wear out with time. They are always being used while wet because water splashes on them, causing deterioration and corrosion. Sometimes, you want something new. It will give your bathroom a different perspective.
Selecting a New Door
The first thing is to decide on the kind of door you need when you buy a toilet door. Wooden doors have been around for ages because they always stay in style. Glass doors bring a contemporary feel to a bathroom space. Plastic-made doors are ideal for those operating under tight budgets since they do not absorb water.
Taking Measurements for the Door Frame
It is essential to take accurate measurements when replacing a toilet door. Measure the height and width of the door frame and the thickness of an existing door, too, to ensure that a fresh one fits tightly within it. Take measurements twice to avoid making mistakes.
Purchasing The Door
Go ahead and buy that new door after collecting your dimensions. One may get this from their local hardware store, or real-time shopping at online sites would be even more suitable, especially if one has little time to spare or stay miles away from the store but make sure that all parts required for its installation have been included like hinges, handles, and screws.
Removing The Old Door
Begin by unscrewing the old door carefully, taking care not to break off anything in doing so, and let someone hold it as you detach it so as not to allow any damage upon falling since due responsibility must be taken during disposal of such stuff.
Preparing The Frame
Check for any damage on your frame before installing a new door: repair cracks, fill holes with putty where necessary, and sand down if needed. Otherwise, this will ensure an excellent fit and smooth operation once again. Finally, clean the place, removing dirt before proceeding with the next step.
How To Install New Doors
Firstly, the hinges are to be fixed on a new door before aligning it with the frame, after which these hinges are screwed in properly. Test if it opens and closes smoothly, or else do some adjustments.
Adding The Final Touch
The next thing to do is place your lock and handle per the manufacturer’s guide. Make sure that this works appropriately by trying the knob and then check whether there exist any gaps on its seal.
Maintaining Your New Door
To sustain the look of your newly acquired door:
- Keep washing it using a wet cloth.
- Do not apply chemicals known to be corrosive since they will harm the finishing.
- Check for loose screws near hinges or handles, which need tightening from time to time.
Common Troubles
Certain hitches could occur following proper installation processes. One such issue is doors failing to close completely because they are out of line at their hinges, thereby creating misalignments and affecting their functioning. However, all one needs to do in such cases is adjust them accordingly to fix everything up or otherwise shave edges slightly when doors stick too much.
When You Need Experts’ Help
Sometimes, DIY projects can become quite challenging. If you have more complex problems than expected, always contact specialists from https://www.pshomemaintenance.com/ who possess the skills and equipment required for solving issues like this because hiring professionals guarantees quality craft instead of making mistakes.
What A New Door Can Do for You?
A toilet door makes your bathroom look better and adds value to your home. These modern doors help maintain temperature within your bathroom while being energy efficient.
